Fiber Solutions

As the high cost of conventional fiber optic cable laying, so the companies arelaying fiber optic cable industry and try to create a unique laying process to avoid costly expenses. In addition, this method should reach just short of layingtime. To achieve this purpose, the use of existing urban areas the mostpromising lines of metro rail operators are also considered. Track laying fiber optic cable commonly used wrinkle seamless stainless steel sheath, has a certain rigidity required, which is the root of the permanent track geometry is an important location advantages, the choice of wrinkles along the road curvedshape to facilitate fiber optic cable in order to each user access point forbranch operations. Meanwhile, the steel jacket structure has a high level ofperformance, impact resistance and anti-rat, and in case of fire also hasadvantages, because the metal core plastic cable sheath can withstand the high pressures generated by melting.

 
User cable

User is the user access point to the cable terminal equipment cable. When the user access point placed outdoors, the outdoor section should be used inoutdoor or indoor and outdoor dual-fiber optic cable into. When the user accesspoint in the room or building, the user should use the indoor fiber optic cablefiber optic cable. Indoor integrated wiring cable is generally used with single-core, dual-core, branch cable and fiber optic wiring, or the laying of optical fiberunit blowing EPFU. Gas Chuiguang Qian system is the principle of optical fiberwill or may take place between a group of pipeline installation, also known as"doing catheter" or "micro-channel." When you need to lay fiber-optic networkbetween two points, through a dedicated fiber optic installer to "blow" into thepipe, then use the connector to connect fiber. Because the fiber unit can beremoved, replaced, and the fiber count and fiber type on the upgrade, which is widely used in CPN and interior.